Commercial Demolition is the process of demolishing or dismantling commercial buildings, such as commercial shops, factories, offices, hotels, houses, and others. It usually needs more caution and scrutiny than most residential demolitions, so be prepared for what’s to come. The process also involves more destruction and less renovation, so plan accordingly. The following are some common terms related to commercial demolition, along with explanations for each.
Mechanical Demolition: Mechanical demolition is the process of removing or demolishing a commercial building by the use of advanced mechanical equipment, such as cranes, bulldozers, loaders, trucks, and even vacuum trucks. The main advantage of mechanical demolition over other types is that everything is removed with absolutely no human interference. No one has to be harmed in this process. Mechanical demolition may be used for a variety of reasons, including but not limited to: to remove excessive amounts of building debris, for better aesthetic appeal, and for safety and security. In this sense, mechanical demolition is sometimes considered replacing the previous process of demolition.
Asbestos Demolition: Asbestos removal can take place in a variety of ways, including asbestos abatement, bagging, and melting. When asbestos removal occurs, it is often done through the use of specialized equipment that is safe work method for the workers, who do not need any special protective gear. This type of commercial site demolition involves the careful scraping of asbestos fibers from the affected materials, which will be then bagged and disposed of in a safe manner. The bagging method will usually need the consent of the property owner to commence the process, which should be obtained prior to hiring contractors or subcontractors. Once the asbestos fibers are removed, they will then be rinsed or painted to prevent re-mination of the dangerous asbestos fibers.
Removal Of Nondestructive Garbage And Solid Waste Dump: A good way to reduce the volume of solid and non-solid waste materials that will be generated at a commercial demolition project is through the use of mechanical demolition. This will help reduce the volume of trash that would otherwise be generated in the process of debris removal. It will also help cut down on the costs incurred by making the use of trucks to transport debris to the landfill. The mechanical demolition technique used can include the use of hydraulic excavators, cranes, shredders, compactors and dump trucks. It is important however that the mechanical demolition process is carefully monitored to make sure that all the required guidelines and safety guidelines have been followed.
Cost Of Demolition: When comparing commercial demolition cost against the national average of land per square foot, it is clear that the cost of demolishing a building is considerably higher than the cost of building a new construction. This gap can be explained by the fact that building the same building is not only determined by economic factors but also by environmental considerations. A commercial demolition cost is higher in some geographical areas than in others. For example, a building that is required to be demolished per square footage to make an average building project would be required to be demolished twice as often as a building that is only required to be demolished once.
Asbestos Disposal: There are some locations where the presence of asbestos can increase the commercial demolition cost substantially. Where there are already high costs involved in getting rid of unwanted building materials, the additional cost of bringing in an asbestos survey will only add to these expenses. In addition, the use of hazardous materials in the process of demolition can create health hazards to workers and may increase the amount of cleanup that has to be done. For this reason it is highly recommended that asbestos surveys are carried out prior to the start of any demolition work. In the United Kingdom this service is provided by asbestos surveyors known as asbestos remediation companies.
Demolition Of Residential Living Places: Due to the fact that there are few legal requirements in place for the removal of lead-based paint in residential homes the amount of waste produced during the process of demolishing the property is higher than most commercial demolition sites. This means that commercial demolition cost will be much higher than the cost of residential demolition. The two main ways in which the residential community is demolished is by using explosives or by using specialized equipment. The most efficient method of demolition usually involves the use of explosives due to the relatively quick time duration of this method. Residential demolition can take anywhere from several days to several weeks while commercial demolition can take anywhere between a couple of hours to a few months. Once the required demolitions material is in place the rest of the job depends upon the contractor.
Strip-outs: During a commercial demolition project there are a variety of tasks that have to be carried out such as the removal of old structural steel beams as well as concrete support columns. All of these will need to be brought down without harming any of the surrounding buildings or damaging the soil around the site. All damaged concrete or steel beams will then need to be removed and the strip-outs need to be transported to the site of the actual demolition. These strip-outs will then need to be securely placed on the ground so that they do not fall off or become damaged in another manner.